Data Center Or Central Data Processing | Part 6
The Apparatus Of Central Data Processing Network
It is intended as an apparatus of a network switch that ensures high security, reliability and scalability and allows easy subsequent software upgrade.
This will be implemented so the intelligent network services such as QoS (Quality of Service) advanCentral Data Processing traffic prioritization, filters and safety management multicast to the network perimeter while maintaining the simplicity of traditional LAN switching.
The switch could for instance have 24 port 10/100 desktop connections to ports and 2 GBIC-based Gigabit Ethernet (Gigabit Interface Converter) that allow you to install a current type of configuration for the stack and the uplink and to reserve for the future ability to migrate to other types of configuration.
The apparatus must be equipped with redundant power supply connected directly to the electricity grid, the main power is instead connected to the UPS.
Permutations of the PBX:
It is good to realize that allow it, also include the telephone inside the cabinet. In this case it would be good to choose a PBX equipped, front panel, all the necessary sockets and in particular the RJ45 connectors for connecting lines and internal and USB sockets, RS232, audio input for music on hold on the PBX, etc.
Also this apparatus must be equipped with redundant power supply connected directly to the mains. The main power is instead connected to the UPS.
Central Management Server:
The choice of the Central Management Server is very complex and must be made on the basis of the needs of the company and in anticipation dell’espandibilità future.
The apparatus must be equipped with redundant power supply connected directly to the mains. The main power is instead connected to the UPS.
Uninterrupted Power Supply — UPS:
The choice of the UPS is better suited to be both the scalability of the runtime so that we can extend and optimize the application forms through the use of compatible batteries. Initially, modules will be available enough to ensure 1 hour of autonomy to the equipment present in the closet.
Security and privacy in Central Data Processing Unit:
To comply with the regulations of the new code to the privacy and security laws must operate both on the front computerized by installing the necessary protective hardware and software that make up of the active and passive safety of the place through the services rendered by systems Alarm environmental and peripherals.
Environmental and device management:
You should install an alarm system and security with Central dialer network with mixed analog / GSM and anti-tamper security sabotage. This alarm operates outside of the building using inertial sensors and magnetic sensors mounted on doors and windows, the interior of the building is controlled through the use of volumetric and acoustic sensors. All sensors must be equipped with security controlled by the Central tumper.
You must provide the structure of CCTV cameras and lighting controlled by motion sensors complete. The cameras of the type compatible with TCP / IP, connected directly to the data network allowing even remote control of the situation.
Access to property is regulated through the use of badges: these access control systems provide the capability to allow the passage to persons authorized by a reading device or through voice recognition intercom and allow you to record and verify the transits made.
Telematics:
You should install a hardware firewall upstream connection to the Internet to monitor and manage traffic entering and leaving the network. The wireless network must also be equipped with WEP security (if it was not possible to rely on WPA), MAC Address Control, and authentication via Radius server or an IDS.
Study: From Wikipedia, the free encyclopedia. The text is available under the Creative Commons.
